Craftsman 7-IN. BUFFER / POLISHER 172.10721 Owner's Manual

4 5SAFETY INSTRUCTIONSWARNING: BE SURE to read and understand all instructions in thismanual before using this power tool. Failure to follow all instructions may result inelectric shock, fire and / or serious personal injury.!WORK AREA SAFETY1. Keep your work area clean and well lit. Cluttered and dark areas invite accidents.2. DO NOT operate power tools in explosive atmospheres, such as in the presenceof flammable liquids, gases, or dust. Power tools create sparks which may ignite thedust or fumes.3. Keep bystanders, children and visitors away while operating a power tool.Distractions can cause you to lose control.4. MAKE SURE the work area has ample lighting so you can see the work and thatthere are no obstructions that will interfere with safe operation BEFORE using yourbuffer / polisher.PERSONAL SAFETY1. KNOW your power tool. Read the operator’s manual carefully. Learn the tool’sapplications and limitations, as well as the specific potential hazards related tothis tool.2. STAY ALERT, watch what you are doing and use common sense when operating apower tool.3. DO NOT use tool while tired or under the influence of drugs, alcohol or medication.A moment of inattention while operating power tools may result in serious personalinjury.4. DRESS properly. DO NOT wear loose clothing or jewelry. Pull back long hair.Keep your hair, clothing, and gloves away from moving parts. Loose clothing, or longhair can be caught in moving parts. Air vents often cover moving parts and should alsobe avoided.5. AVOID accidental starting. Be sure switch is in “OFF” position before plugging in.DO NOT carry tools with your finger on the switch. Carrying tools with your finger onthe switch or plugging in tools that have the switch in the “ON” position invitesaccidents.6. Do not overreach. Keep proper footing and balance at all times. Proper footingand balance enables better control of the tool in unexpected situations.7. USE SAFETY EQUIPMENT. Always wear eye protection.SAFETY INSTRUCTIONS cont.1. DO NOT use the tool if switch does not turn it “On” or “Off”. Any tool thatcannot be controlled with the switch is dangerous and must be repaired.2. DISCONNECT the plug from the power source before making anyadjustments, changing accessories or storing the tool. Such preventivesafety measures reduce the risk of starting the tool accidentally.3. STORE idle tools out of the reach of children and other untrained persons.Tools are dangerous in the hands of untrained users.4. CHECK for misalignment or binding of moving parts, breakage of parts, andany other condition that may affect the tool’s operation. If damaged, have thetool serviced before using. Many accidents are caused by poorly maintained tools.5. USE ONLY accessories that are recommended for this tool. Accessories thatmay be suitable for one tool may become hazardous when used on another tool.ELECTRICAL SAFETYWARNING: BE SURE to read and understand all instructions beforeoperating this tool. Failure to follow all instructions listed below may resultin electric shock, fire and/or serious personal injury.!TOOL USE AND CARE SAFETY1. Double insulated tools are equippedwith a polarized plug (one blade is widerthan the other). This plug will fit in apolarized outlet only one way. If the plugdoes not fit fully in the outlet, reverse the plug.If it still does not fit, contact a qualifiedelectrician to install a polarized outlet. Donot change the plug in any way.2. Double insulation eliminates the needfor the three-wire grounded power cord andgrounded power supply system. Applicableonly to Class II (double-insulated) tools.This tool is a double insulated tool.3. BEFORE plugging in the tool, BE SURE thatthe outlet voltage supplied is within thevoltage marked on the tool’s data plate.DO NOT use “AC only” rated tools with aDC power supply.Cover ofGroundedOutlet Box