Craftsman 486.243201 Owner's Manual

Also see for 486.243201: Owner's manual

CARTONCONTENTS(LoosePartsin Carton)1. PolyTray 6. LatchStandBracket 11.WheelSupport2. HandleTube 7. HitchBracket 12.Axle3. FrontTongue 8. LegStandBracket 13.Wheels(2)4. RearTongue 9. LatchLock 14.HandleGrip5. LatchStandPlate 10.LatchMountBrackets(2)11910CARTONCONTENTSTOOLS REQUIRED FOR ASSEMBLY(1) Screwdriver(1)Pliers(2) 7/16" Wrenches(2) 1/2" Wrenches(2) 9/16" WrenchesRemove the hardware pack and all loose partsfrom the carton. Be sure the carton is empty beforediscarding.Lay out all the parts shown on pages 3 and 4.NOTE: All 1/4" flat washers should be assembled so thatthey rest directly against the poly tray surface.STEP 1 : (SEE FIGURE 1)Assemble the latch lock between the latch mountbrackets using a 1/4" x 1" hex bolt (E) and a 1/4"nylock nut (J). Tighten so that the latch lock can stillpivot. Attach the extension spring (N) to the latch lockand the latch mount bracket.Insert the 3/8" x 1" clevis pin (H) through the holesin the latch mount brackets and secure with an 1/8"hairpin cotter (M).LATCH MOUNTBRACKETS(E) 1/4" × 1"HEX BOLT(J) 1/4" NYLOCK NUT(N) EXTENSIONSPRING/(H) 3/8" x 1"CLEVIS PIN(M) 1/8" HAIRPINl COTTERLATCH LOCKFIGURE 14