Craftsman 486.24207 Owner's Manual

Also see for 486.24207: Owner's manual

CARTON CONTENTS1. Sweeper Housing Assembly2. Bag Arm Tube (2)3. Hitch Tube, L.H.4. Hitch Bracket5. Hitch Bracket (Straight)6. Height Adjustment Strap7. Height Adjustment Handle8. Hitch Tube, R.H.9. Rope10. Hopper Bag11. Upper Hopper Tube, R.H.12. Upper Hopper Tube, L.H.13. Lower Hopper Tube, Rear14. Lower Hopper Tube, Side (2)15. Hopper Bag Rod16. Hopper Support Rod (2)17. Bag Frame Strap142110 \\836TOOLS REQUIRED FOR ASSEMBLY(2) 1/2" Open End or Box End Wrench(1) Knife or Scissors(1) HammerREMOVAL OF PARTS FROM CARTON• Remove all parts and hardware packages from thecarton. Lay out all parts and hardware and identifyusing the illustrations on pages 4 and 5.ASSEMBLY OF SWEEPERNote: Right hand (R.H.) and left hand (L.H.) aredetermined from the operator's position while seated onthe tractor.Assemble the angle bracket to the sweeper housingusing a 5/16" x 3/4" hex bolt and a 5/16" hex lock nut.Make sure the bracket is turned as shown andaligned straight with the housing and then tighten.See figure 1.5/16" HEXLOCKNUTANGLEBRACKET5/16"x3_"HEXBOLTFIGURE 14