Craftsman 320.48298 Product Manual

Pythagorean TheoremMeasurement1. Press the "[_:_" key to enterPythagorean Theorem mea _surement mode.2_,The blinking line in "L_"indicates the first side lengthof a right triangle that is to bemeasured (Fig. 18),Press the MEASURE key to turnon the laser beam; the laserindicator blinks from bottom totop (Fig. 19).4. Position the tool to aim the laserat the target. In this example,the tool is positioned in thelower right corner of the triangle.5. Press the MEASURE key to dis-play the measured length of thefirst triangle side in the lowerand upper rows of the screen(Fig. 20).6_ The hypotenuse (diagonal) line in"[_" will start to blink.7_.9_Without changing the toot posi-tion, aim the laser dot at thehypotenuse target.Press the MEASURE key againto display the calculated lengthof the third triangle side in thelower row of the screen; thehypotenuse length wilt be dis-played at the same time in theupper row ( Fig° 2I).Press the MEASURE key tomake a new measurement.NOTES:Fig. 18Fig. 19Fig.206.765 ft6.765Fig. 2115.292 ft13.714ftThe hypotenuse measurementmust be longer than the firstside measurement of a righttriangle, otherwise the LCD will display "Wrong Input" reminding you tore-measure the hypotenuse.48298 Manua!_Revised_07©225 Page 13