Craftsman 320.48252 Owner's Manual

Contents

COMPUTINGAREA1,Positiontooltomeasurearealength2.Pressthe,,,_:__//(__I,,key,theblinkinglinein,,z_:__,,meansthelengthtobemeasured(seeFig.11),,3. Press"Read"keytodisplaythemeasuredlengthintheupperrowofthescreen;thewidthlinein "_" will alsostart to blink,,4. Position tool to measure area width_ Press "Read" again todisplay the measured width in the upper row of the screenand the area will immediately be displayed in the lowerrow (see Fig, 13).5. Press the "Recall" key and the measured length will blinkin the upper row,,Press again to see the measured width_6. Press "Read" key to make a new measurement,COMPUTING VOLUME1. Position tool to measure area length2. Press the "_/__,J "key twice to show" @" on the displayscreen_ The blinking line in" @" means the length to bemeasured (see Fig° 14a).,3. Press "Read" key to display the measured length in the upperrow of the screen; the width line in" (_" will also start toblink (see Fig. t4b).4, Position tool to measure area width., Press "Read" again todisplay the measured width in the upper row of the screen(see Fig. 14c).The height line in" _l_jl" will also start to blink°5. Position tool to measure area height., Press "Read" again todisplay the measured height in the upper row of the screen.The volume will immediately be displayed in the lower row(see Fig. 14d)6. Press the "Recall" key and the measured length will blink inthe upper row, Press again to see the measured width., Pressagain to see the measured height,7, Press "Read" key to make a new measurement,Fig, 11Fig. 133'00"_ eq.ttFig. 14aFig. 14bFig. 14cFig. 14d2'00"3'00"4'00"24 _°This tool has been designed to be a low maintenance tool, However, in order to maintain itsperformance, you must always follow these simple directions,1. ALWAYS handle the tool with care. Treat it as the fine optical device it is Treat it as youwould a camera or binoculars,,2. AVOID exposing the too! to shock, continuous vibration or extreme hot or cold temperatures,.3. ALWAYS store the tool indoors.When not in use, ALWAYS store the tool in its protective case4. ALWAYS keep the tool free or dust and liquids°5. ALWAYS clean and thoroughly dry the tool after each use.7