GENERAL SAFETY RULES,_ WARNING: Read all safety warnings and instructions. Failure to follow thewarnings and instructions may result in electric shock, fire and/or serious injury.Save all warnings and instructions for future reference.READ AND SAVE THESE iNSTRUCTiONS,_ WARNING: Do not modify this tool and/or used it for any application otherthan that for which it was designed.• Know your stand. Do not attempt to assemble or operate your stand untilyou have read the safety instructions in this section.Only use your stand on a hard, dry and fiat surface.= Do not load the stand with more than 330 ibs.= Do not stand or climb on the stand, it could tip over causing serious injury.= Do not permit children to use the stand unsupervised, it is not a toy.= Be sure all locking pins are in the set=up position holes before usingyour power tool and stand.• Unplug your power tool before moving or repositioning it.= Always firmly attach any bench top tool used with this stand. Do notattempt to use your stand until the bench top tool is fastened firmly.= Always keep all guards in place. Be sure all power tool guards are in goodworking order and are in proper adjustment and alignment.= Always keep your hands away from the cutting area.Page 6 16492 ManuaLRevised_12 0528