Craftsman 24597 Installation Instructions Manual

Contents

installation instructions

1Front BumperPart No. 24597INSTALLATION1. Attach bumper (A, Figure 2) to frame (B) securingwith 5/16-18 x 7/8 capscrews (C) and 5/16-18 flangelock nuts (D).Figure 1. ContentsFigure 2. Bumper Installation (Footrest and SpindlesGhosted for Clarity)A. BumperB. FrameC. Capscrews, 5/16-18 x 7/8D. Nut, Flange Lock, 5/16-18Kit Contents:Ref Part No. Qty. Description1 1727006 1 Bumper Assembly2 1927557 4 Nut, Flange Lock, 5/16-183 1923325 4 Capscrew, Hex, 5/16-18 x 7/8A1Before beginning any service work turn off thePTO, set the parking brake, turn off the ignition,remove the key, and disconnect the spark plugwire(s).WARNING32Installation InstructionsSears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.Visit our Craftsman website: www.sears.com/craftsman TP 200-4056-04-AT-C1726916-04CCDDBNote: Lift front of bumper up while tightening hardware toprevent wheels from contacting bumper.For ZTS 7500 or ZT 7000(Items 27768, 27770, 27772 or 27774)

/ 1

Related manuals for Craftsman 24597