Craftsman 172.67098 Operator's Manual

Also see for 172.67098: Operator's manual

10 11SAFETY INSTRUCTIONS cont.! If any parts are missing do not operate this tool until themissing parts are replaced. Failure to do so could result in possible seriouspersonal injury.WARNING:! Do not attempt to modify this tool or create accessories notrecommended for use with this tool. Any such alteration or modification is misuseand could result in a hazardous condition leading to possible serious personalinjuryWARNING:! To prevent accidental starting that could cause seriouspersonal injury, always remove the battery pack from the tool whenassembling parts.WARNING:1. Know your drill / driver. Read operator’s manual carefully. Learn the applicationsand limitations, as well as the specific potential hazards related to this tool. Followingthis rule will reduce the risk of electric shock, fire or serious injury.2. ALWAYS wear safety glasses or eye shields when using this drill / driver.Everyday eyeglasses have only impact-resistant lenses; they are NOT safety glasses.3. PROTECT your lungs. Wear a face mask or dust mask if the operation is dusty.4. PROTECT your hearing. Wear appropriate personal hearing protection during use.Under some conditions noise from this product may contribute to hearing loss.5. SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instructothers who may use this tool. If someone borrows this tool, make sure they havethese instructions also.CARTON CONTENTSThis product has been shipped completely assembled.1. Carefully remove the Storage/Carrying Bag with Drill/Driver and Battery Pack,Charging Stand/Transformer and Screwdriver Bits from the box.2. Make sure that all items listed in the packing list are included.3. Inspect the tool carefully to make sure no breakage or damage occurred duringshipping.4. Do not discard the packing material until you have carefully inspected andsatisfactorily operated the tool.5. If any parts are missing, return to the nearest Sears store or other Craftsman outletto have the Drill / Driver replaced.PACKING LIST (Fig.1)Drill / Driver with Battery Pack2 Double EndedScrewdriver Bits(stored on Drill/Driver)ChargingStand / TransformerWARNING:! Some dust created by using power tools contains chemicalsknown to the State of California to cause cancer and birth defects or otherreproductive harm. Some examples of these chemicals are:• Lead from lead-based paints.• Crystalline silica from bricks and cement and other masonry products.• Arsenic and chromium, from chemically treated lumber.Your risk from these exposures varies, depending upon how often you dothis type of work. To reduce your exposure to these chemicals:• Work in a well-ventilated area.• Work with approved safety equipment, such as those dust masks that are speciallydesigned to filter out microscopic particles.Avoid prolonged contact with dust from power sanding, sawing, grinding,drilling and other construction activities. Wear protective clothing and washexposed areas with soap and water. Allowing dust to get into your mouth, eyes, orlay on the skin may promote absorption of harmful chemicals.! Use of this tool can generate and/or disburse dust, whichmay cause serious and permanent respiratory or other injury. Always useNIOSH/OSHA approved respiratory protection appropriate for the dust exposure.Direct particles away from face and body.WARNING:ADDITIONAL RULES FOR SAFE OPERATION! BE SURE to read and understand all instructions. Failure tofollow all instructions listed may result in electric shock, fire and/or seriouspersonal injury.WARNING:Operator’s ManualStorage / Carrying Bag(5 1 /2 -in. Circular Saw withBlade is shown in sawmanual)®135711®