Craftsman 11407 Operator's Manual

Contents

SWITCH TRIGGERSee Figure4.To turn the Jighton and off, depress the switch trigger.SWITCHFig. 4HANGING/STORAGE HOOKSee Figure5.On top of the housing is a hook which you can use tohang the light, This is good for storing the light when notin use and keeping the light out of the reach of children.To use, simply lift up on the hook.HANGING/STORAGEHOOKTORAISETOLOWER,Fig. 5,_L WARNING: When servicing, use only identicalCraftsman replacement parts. Use of any other partmay create a hazard or cause product damage._L WARNING: Always wear safety goggles or safetyglasses with side shields when using compressedair to clean worklights. If the operation is dusty, alsowear a dust mask._L WARNING: To avoid serious personalinjury, alwaysremove the battery pack from the worklight whencleaning or performing any maintenance.GENERAL MAINTENANCEAvoid using solvents when cleaning plastic parts. Mostplastics are susceptible to damage from various types ofcommercial solvents and may be damaged by their use.Use clean cloths to remove dirt, dust, oil, grease, etc.,_ WARNING: Do not at any time let brake fluids,gasoline, petroleum-based products,penetratingoils, etc. come in contact with plastic parts. Chemi-cals can damage, weaken or destroy plastic whichmay result in serious personal injury.Only the parts shown in the parts list are intended tobe repaired or replaced by the customer. All other partsshould be replaced at a Sears Service Center.12

/ 15

Related manuals for Craftsman 11407