Craftsman 103.22181 Operating Instructions And Parts List Manual

OPERATING iNSTRUCTIONS AND PARTS L|ST FOR9 raNCH BENCH SAVe/Model 103.22181MITER PROTRACTORLOCK KNOBFENCEFENCE SLIDE BARCONTROL KNOBFIGURE IThis 9-1nch Tilting Arbor Bench Saw will producequality work satisfying the demands of the mostexacting craftsman.To increase the versatility of this saw beyond thenormal range of Bench Saw operations, various ac-cessories are readily available° See Page 5oTo prevent damage in shipping, some of the partswere disassembled from the tool. These parts arelisted below. Be sure they are all accounted for beforediscarding any of the packing material.1. Fence; item 106.2. Miter gage assembly; item 114.3. Insert with clips; items 15, 16 and 17o4. Motor pulley; item 66,5. V-belt; item 64.6. Bag contains 10, 11, 12, 13, 19, 20, 23, 24, and63.7. Fence Slide Bar; item 2.ASSEMBLY:Front Fence BarThe front fence bar must be fastened to the frontedge of the saw table with three (3) slotted headscrews, No. 10, spacers, No. 11, lock washers, Noo 12,and hex nuts, No. 13. See Fig. 2.Before -tightening the screws securely, the fencebar must be accurately adjusted to the 2t/32 dimen-sion over the entire length.INSTALLATION OF TABLE INSERT:The insert in the saw has six tabs which rest on theledge of the table insert opening°FIGURE 2FIGURE 3