Cisco X2-10GB-SR Installation Notes

Contents

related documentation

Americas Headquarters:Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USACisco 10-Gigabit Ethernet X2 TransceiverModules Installation NoteRevised: September 23, 2011Product Numbers:This installation note provides the installation instructions for the 10-Gigabit Ethernet X2 transceivermodules listed above and contains these sections:• Overview, page 1• Safety, page 7• Required Tools, page 13• Installing the 10-Gigabit Ethernet X2 Transceiver Module, page 13• Removing the 10-Gigabit Ethernet X2 Transceiver Module, page 17• Translated Safety Warnings, page 19• Related Documentation, page 24• Obtaining Documentation and Submitting a Service Request, page 25OverviewThe 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-GigabitEthernet ports. Figure 1 shows an X2 transceiver module with the major features identified. The X2transceiver module connects the electrical circuitry of the system with the optical or copper network.X2-10GB-SR= X2-10GB-LR= X2-10GB-ER= X2-10GB-ZR=X2-10GB-CX4= X2-10GB-LX4= X2-10GB-LRM= DWDM-X2-xx.xx=X2-10GB-T=