Cisco SCE8000 Configuration Manual

Also see for SCE8000 GBE: Installation and configuration guide Quick start guide Installation and configuration guide Configuration guide Installation guide

Contents

C H A P T E R2-1Cisco SCE8000 10GBE Installation and Configuration GuideOL-16478-052Introduction to the Cisco SCE8000 10GBEPlatformRevised: August 23, 2010, OL-16478-05IntroductionThis chapter provides an introduction to the Cisco SCE8000 10GBE platform, the Service Controlhardware component.• Information About the SCE Platform, page 2-1• Service Control Module (SCE8000-SCM-E), page 2-3• Introduction to SIPs and SPAs, page 2-5• The SCE8000-SIP, page 2-8• The 1-Port 10GBE SPA Interface Module, page 2-8• The Cisco SCE8000 Optical Bypass, page 2-9• Checking the Shipping Container Contents, page 2-15• Cisco SCE8000 Installation Checklist, page 2-17Information About the SCE PlatformThe Service Control Engine (SCE) platform, which is the hardware component of the Cisco ServiceControl solution, is designed to support observation, analysis, and control of Internet/IP traffic.Table 2-1 summarizes model information for the Cisco SCE8000 platform.Table 2-1 SCE Platform Model InformationModel number Cisco SCE8000 10GBELink Type 10 Gigabit EthernetNumber of Ports 2 or 4Number of Links 1 or 2