Menu
Cisco Meraki MT10 Installation Manual
       |
MT10 Installation Guide - Temperature and HumidityOverviewThe Cisco Meraki MT10 is a cloud-managed temperature and humidity sensor that is exceptionally simple to configure and deploy due to its integration with theMeraki dashboard and the use of Bluetooth Low Energy technology. The MT family eliminates the complex and costly setup required by traditional solutions byremoving the limitations of placement of these sensors.Pre-Installation PreparationYou should complete the following steps before going on-site to perform an installation:Configure Your Network in the DashboardThe following is a brief overview of the steps required to add an MT10 to your network. For detailed instructions about creating, configuring, and managingMeraki sensor networks, refer to the MT-Sensors online documentation.1. Log in to http://dashboard.meraki.com. If this is your first time, create a new account.2. Find the network to which you plan to add your sensor, or create a new network.3. Add the sensors to your network. You will need your Meraki order number (found on your invoice) or the serialnumber of each sensor, which looks like Qxxx-xxxx-xxxx, and can be found on the back of the unit or included inthe box.4. Add the gateway (MV or MR) to the same network as the sensor.Quickly Scan and Claim Multiple Devices through the Meraki Mobile AppIf you have to claim multiple devices, the quickest way is by scanning their barcode using the Meraki app.1. Log in to your Meraki iOS or Android app with your Meraki dashboard account. Create a new account if you do nothave one.2. Navigate to the correct network through left-side bar.3. Go to the Devices tab from the bottom navigation bar.4. Select the + icon on the top right of the screen and pick Scan new device barcode.5. Point your phone camera toward the hardware barcode to claim the device.6. Enter device information and then select Done. Press Add another to claim a new device.NOTE: Make sure the gateway is in the same network and is online and operational.Click here for MV setup instructions and MR setup instructions.1 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved