Cisco IP DECT 6825 Quick Start Manual

Also see for IP DECT 6825: User guide User guide User guide User guide Hardware installation

Cisco IP DECT 6825 Handset Quick Start Guide1 | P a g eYour HandsetLegendIndicator light (LED)Emergency button (if configured)Headset portSoftkeys, phone control buttons (Speaker, Menu),Navigation cluster (Navigation ring and Select button,call control buttons (Answer/Send, Power/End)KeypadVolume and Mute buttonsTurn On Your HandsetPress and hold Power/End until the screen turns on.Turn Off Your HandsetPress and hold Power/End until the screen turns off.Lock the Handset KeypadYou can lock the handset keypad to stop accidental dialing.When you lock the keypad, you can still dial emergencynumbers. The softkey label does not display when you lockthe keypad.Press and hold Zero (0) until the message“Press and hold 0” is displayed on the screen.Unlock the Handset KeypadYou must unlock the handset keypad to make calls. Youcan however, dial emergency numbers from the lockedkeypad. When you unlock the keypad, the softkey labelsappear..Press and hold Zero (0) until the message“Press and hold 0” does not display on the screen.Make a Call1. When your handset is idle, enter the phone numberwith the keypad.2. Press Answer/Send or Call softkey..Report an Emergency Situation(If configured)Press and hold Emergency for 3 seconds.Answer a CallPress Answer/Send or Answer softkey.Hold and Resume a Call1. From an active call, press Hold softkey.2. Press Resume softkey to pick the call back up.Mute Your Call1. Press Mute hard button on side of handset.2. To unmute yourself, press Mute again.Create a Conference Call1. From an active call, press Conf softkey, then pressthe Hold softkey.2. Enter the coworker’s number and pressAnswer/Send or Call softkey.3. Press the Swap softkey to swap between the first partyon hold and the second party called.4. Press Conf softkey after the coworker answers.Transfer a Call1. From an active call, press Transfer.2. Enter the coworker’s number and press Answer/Send or Call softkey.3. Press Transfer after the first ring tone or after yourcoworker answers.1 2 1 2

/ 2

Related manuals for Cisco IP DECT 6825