Menu
Cisco EIA/TIA-449 Serial Cable CAB-449FC Specification Sheet
     |
CAB−449MT and CAB−449FC EIA/TIA−449 SerialCable SpecificationsDocument ID: 46801IntroductionPrerequisitesRequirementsComponents UsedConventionsEIA/TIA−449 Speed and Distance LimitationsSerial Cable CAB−449MTEIA/TIA−449 Serial Cable AssemblyEIA/TIA−449 DTE Cable PinoutsSerial Cable CAB−449FCEIA/TIA−449 DCE Cable Pinouts (DB−60 to DB−37)Related InformationIntroductionThis document provides the technical and cable specifications for the EIA/TIA−449 serial cables.PrerequisitesRequirementsThere are no specific requirements for this document.Components UsedThis document is not restricted to specific software and hardware versions.The information in this document was created from the devices in a specific lab environment. All of thedevices used in this document started with a cleared (default) configuration. If your network is live, make surethat you understand the potential impact of any command.ConventionsFor more information on document conventions, see the Cisco Technical Tips Conventions.EIA/TIA−449 Speed and Distance LimitationsThe use of balanced drivers allows EIA/TIA−449 signals to travel greater distances than the EIA/TIA−232standard. The table below lists the standard relationship between baud rate and maximum distance forEIA/TIA−449 signals. These limits are also valid for V.35 and X.21.Data Rate (Baud) Distance (Feet) Distance (Meters)2400 4,100 1,250 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved