Cisco Catalyst 9600 Series Installation Note

Cisco Catalyst 9600 Series Line Card InstallationNoteFirst Published: 2019-04-15Last Modified: 2019-12-20Overview of Cisco Catalyst 9600 Series Line CardsThis document describes the features of a Cisco Catalyst 9600 Series line card. It also provides informationabout how to correctly install or replace a line card in the chassis.Table 1: Supported Line CardsDescriptionProduct IDCisco Catalyst 9600 Series 48-port 25 G1 or 10 G or 1 GC9600-LC-48YLCisco Catalyst 9600 Series 24-port 40 G/1 G or 12-port 100 GC9600-LC-24CCisco Catalyst 9600 Series 48-port 10 G, 5 G, 2.5 G, 1 G, 100 Mbps, or 10 MbpsC9600-LC-48TX1 G stands for Gigabit Ethernet.Features of Cisco Catalyst 9600 Series Line CardsThe following sections describe the major features available on the line cards that are supported on CiscoCatalyst 9600 Series switches. The document also explains the front view of the line cards and the differentLEDs available.Cisco Catalyst 9600 Series 24-Port 40 G/1 G/12-Port 100 G (C9600-LC-24C)The following figure shows the front view of a Cisco Catalyst 9600 Series 24-port 40 G/1 G/12-port 100 G(C9600-LC-24C) with major features identified.Cisco Catalyst 9600 Series Line Card Installation Note1