Cisco CIVS-IPC-2600 Quick Start Manual

Also see for 2600 Series: Hardware installation guide Configuration guide Hardware installation guide Manual Software configuration guide

Contents

Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000800 553-NETS (6387)Fax: 408 527-0883Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affiliates in theUnited States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of theword partner does not imply a partnership relationship between Cisco and any other company. (0705R)© 2010 Cisco Systems, Inc. All rights reserved.Printed in China PRC78-19717-01Cisco Video Surveillance 2600 IP CameraModel CIVS-IPC-26001 Package Contents2 Installing the IP Camera3 Accessing the IP Camera for the First Time4 Where to go from Here5 Technical SupportStep 7 If you are prompted to install ActiveX controls, follow the on-screenprompts to do so.ActiveX is required to view video from the IP camera.After you complete this procedure, the Main window appears and video from the IPcamera starts playing automatically. You can now click Home to view live video fromthe IP camera, click Setup to configure other options and perform variousadministrative tasks, or click Logout to exit4 Where to go from HereFor detailed information about understanding, installing, configuring, operating,administering, and troubleshooting the IP camera, see Cisco Video SurveillanceIP Camera User Guide. This document is available at www.cisco.com/go/ipcamera.5 Technical SupportTo request technical assistance, contact the Cisco Technical Assistance Center (TAC)in one of the following ways:• Online—http://www.cisco.com/tac/• E-mail—tac@cisco.com• Phone—In North America: 800 553-2447Outside North America: 408 526-7209Q UICK S TART G UIDE

/ 2

Related manuals for Cisco 2600 Series