Cisco CAB-530MT Specification Sheet

Contents

CAB−530MT Serial Cable SpecificationsDocument ID: 46802IntroductionPrerequisitesRequirementsComponents UsedConventionsCAB−530MT Serial Cable AssemblyEIA−530 DTE Cable Pinouts (DB−60 to DB−25)Related InformationIntroductionThis document provides the technical and cable specifications for the CAB−530MT serial cable.PrerequisitesRequirementsThere are no specific requirements for this document.Components UsedThis document is not restricted to specific software and hardware versions.The information in this document was created from the devices in a specific lab environment. All of thedevices used in this document started with a cleared (default) configuration. If your network is live, make surethat you understand the potential impact of any command.ConventionsRefer to Cisco Technical Tips Conventions for more information on document conventions.CAB−530MT Serial Cable AssemblyThe cable gender for this product (part number 72−0797−01) is Male DB−60 to Male DB−25, mode − DTEonly.The CAB−530MT cable is used in the Cisco 7000 family, Cisco 4000 series, Cisco 3600 series, Cisco 2500series, Cisco 1600 series, Cisco access servers, and AccessPro PC cards. This cable has a male DB−60connector on the Cisco end and a male DB−25 connector on the network end.

/ 3

Related manuals for Cisco CAB-530MT