Menu
Cisco Aironet Power Injector AIR-PWRINJ5 Installation Manual
      |
Cisco Systems, Inc.www.cisco.comCisco Aironet Power Injector(AIR-PWRINJ5) Installation GuidePrefaceThe Cisco Aironet Power Injector (AIR-PWRINJ5) increases wireless LAN deployment flexibility ofCisco Aironet Access Points by providing an alternative powering option to local power, inlinepower-capable multiport switches, and multiport power patch panels.The single-port Cisco Aironet Power Injector provides 802.3af power and data signal, sending both tothe Cisco Aironet Access Point.The power injectors provide up to 15.4 W over the unused wire pairs of a Category 5 or better Ethernetcable, supplying enough power for a distance of 328 ft. (100 m) on the Cisco Aironet 1040, 1140, 1260,2600, and 3500 Series Access Points. While it can also support the Cisco Aironet Series 3600 AccessPoints when modules are not being used, it is recommended to use the AIR-PWRINJ4= power injectorinstead for the 3600 series, as it has sufficient power to supply to the AP and any installed modules.This guide covers the following Cisco Aironet Power Injector:• Cisco Aironet Power Injector (AIR-PWRINJ5)Cisco Aironet Power InjectorThe Cisco Aironet Power Injector provides both power and data to a connected Cisco Aironet AccessPoint. The device serves the following functions:• It provides Category 5 or better Ethernet media to the access point.• It uses wires in an Ethernet cable to supply inline 15.4 W power to an access point. The powerinjector provides an easy and economical way to provide data and power to an access point locatedin areas where power is not available.The power injector is used with the following Cisco Aironet Series Access Points:• 1040 series access points• 1140 series access points• 1260 series access points |
Related manuals for Cisco Aironet Power Injector AIR-PWRINJ5
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved