Cisco AT&T 3G MicroCell Getting Started Manual

Also see for AT&T 3G MicroCell: User manual User manual Quick start guide

If anything is missing or appears to be damaged,contact AT&T Customer Support at 1.800.768.1212for assistance.Let’s get started.Start Here!AT&T 3G MicroCell TMGetting Started GuideC ongratulations on the purchase of your new AT&T 3G MicroCell TM. The 3G MicroCell provides voice and data service to AT&T 3Gwireless phones and devices within your home or small business environment. The 3G MicroCell is secure and can deliver maximumcellular signal strength within its coverage area – it’s like having your own mini cell tower in your home or office.• Allow up to 2 hours to have your 3G MicroCell up and running. Your part (online activation and equipment setup)takes 10-15 minutes. The additional time is for system configuration and 3G service activation. These tasks arehandled by the 3G MicroCell and require no effort on your part.System Administrators (business customers) see Firewall Specifications on page 5 of the AT&T 3G MicroCell TM User Manual.What’s in the Box?• Remove the contents of the AT&T 3G MicroCell TM package.• Verify that you received the following:AT&T 3G MicroCell™AC PowerAdapterYellowEthernet CableGetting Started Guideand User ManualIf anything is missing or appears to be damaged,contact AT&T Customer Support at 1.888.334.3787and enter PIN 88346 for assistance.Let’s get started.Start Here!AT&T 3G MicroCell TMGetting Started GuideC ongratulations on the purchase of your new AT&T 3G MicroCell TM. The 3G MicroCell provides voice and data service to AT&T 3Gwireless phones and devices within your home or small business environment. The 3G MicroCell is secure and can deliver maximum cel-lular signal strength within its coverage area – it’s like having your own mini cell tower in your home or office.• Allow up to two hours to have your 3G MicroCell up and running. Your part (online activation and equipment setup)takes 10-15 minutes. The additional time is required for system synchronization between the 3G MicroCell and theAT&T network.• In order to activate your 3G MicroCell you will be required to enter your AT&T myWireless Account user nameand password (the same account you use to pay your wireless bill online). If you have not previously registeredfor a user name and password, you will be required to do so during the 3G MicroCell setup.What’s in the Box?• Remove the contents of the AT&T 3G MicroCell TM package.• Verify that you received the following:AT&T 3G MicroCell™AC PowerAdapterYellowEthernet CableGetting Started Guideand User ManualUserManualAT&T3G MicroCell™UserManualAT&T3G MicroCell™