Cisco 800 series Configuring

Also see for 2800 Series: Datasheet Hardware installation guide Guide Guide Application note

Contents

Americas Headquarters:Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA© 2007, 2009 Cisco Systems, Inc. All rights reserved.Configuring Radio Settings on an Access PointThis module describes how to configure radio settings on a Cisco 800, 1800, 2800, or 3800 seriesintegrated services router, hereafter referred to as an access point (AP).Finding Feature Information in This ModuleYour Cisco IOS software release may not support all of the features documented in this module. To reachlinks to specific feature documentation in this module and to see a list of the releases in which each feature issupported, use the “Feature Information for Configuring Radio Settings on an Access Point” section onpage 29.Finding Support Information for Platforms and Cisco IOS Software ImagesUse Cisco Feature Navigator to find information about platform support and Cisco IOS software imagesupport. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account onCisco.com. If you do not have an account or have forgotten your username or password, click Cancel atthe login dialog box and follow the instructions that appear.Contents• Information About Configuring Radio Settings on an Access Point, page 2• How to Configure Radio Settings on an Access Point, page 3• Configuration Examples for Radio Settings on an Access Point, page 27• Additional References, page 28• Feature Information for Configuring Radio Settings on an Access Point, page 29