Cisco Unified Wireless IP Phone 7925G,7925G-EX, and 7926G Setup• Before You Begin, page 1• Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Installation, page 8• Bulk Provisioning, page 17• Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Startup, page 17• Phone Startup Process, page 18Before You BeginBefore installing a Cisco Unified Wireless IP Phone, review the requirements in the following sections.Network RequirementsFor the Cisco Unified Wireless IP Phone to successfully operate as a Cisco Unified IP Phone endpoint, yournetwork must support these requirements:• Voice over Wireless LAN◦Cisco Aironet Access Points (APs) configured to support Voice over WLAN (VoWLAN)◦Controllers and switches configured to support VoWLAN◦Security implemented for authenticating wireless voice devices and usersYou must verify that your wireless network is configured properly for voice service.Note• VoIP Network◦Cisco routers and gateways configured for VoIPCisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide1