Cisco 605 Quick Start Manual

Quick StartF O R C I S C O 605The Cisco 605 Personal PCI ADSL Modem is PCI adapter for use inPCI-compliant personal computers. Designed for easy installation, themodem slides into any PCI slot.Related InformationThis Quick Start provides instructions for installing the Cisco 605hardware only. For information on installing the Cisco 605 software,refer to the Cisco 605 Personal PCI ADSL Modem User’s Guide.Parts List• Cisco 605 Personal PCI ADSL modem• Cisco 605 CD-ROM• Cisco 605 Personal PCI ADSL Modem User’s Manual• ADSL cable (RJ-11 phone cable)Optionally, your shipment may include in-line EZ-DSL Microfilters,wall-mount microfilters, or filter cables.Hardware and Software RequirementsThe following hardware and software requirements are necessary toconfigure and use the Cisco 605:• A Pentium, PentiumPro, or compatible processor with an availablebus-mastering PCI expansion slot• 10BaseT or 10/100BaseT Ethernet adapter• CD-ROM drive• Windows 95, Windows 98, or Windows NT 4.0. All three platformsshould have Dial-Up Networking (DUN) installed and Windows NT4.0 should have the Remote Access Service (RAS) installed.• Windows 95 requires the Dial-Up Networking update Version 1.2.Installing the Cisco 605Before InstallationInstall the checksw.exe executable from the Cisco 605 CD-ROM beforeinstalling the card. Also, determine the following information.• Your operating system: Windows NT 4.0, Windows 95, orWindows 98.• Driver software you want to install: PPP or 1483• If you are using 1483 driver software, the MAC address of theCisco 605 (located on a sticker on the Cisco 605 unit)• Your configuration: EZ-DSL or POTS Splitter.• Number of virtual connections the Cisco 605 will use: one, two, orthree• Virtual circuit numberIf you have questions about any of the preceding information, contact yourInternet service provider (ISP).Unpacking the BoxUnpack the shipping carton and ensure that parts listed in the “Parts List”section of this document are included.Examining the Cisco 605After you open the box, unpack and examine the Cisco 605.Caution Static discharge or electricity can severely damagethe Cisco 605. Before you handle the Cisco 605 or any PC boardsinside your PC, take standard precautions, such as touching themetal covering on the PC box, to ground yourself. 16918

/ 2

Related manuals for Cisco 605