Cisco 3600 Series Configuration Note

Also see for 3600 Series: Configuration guide Hardware installation guide Manual Product overview Upgrade instructions

1Doc. No.Cisco Systems, Inc.All rights reserved.170 West Tasman DriveSan Jose, CA 95134-1706USACisco Systems, Inc.Corporate HeadquartersCopyright © 1996Cisco 3600 Series Power SupplyConfiguration NoteCisco Product Numbers:PWR-3620-AC=, PWR-3620-DC=, PWR-3640-AC=, PWR-3640-DC=This document describes how to replace the AC or DC power supply in a Cisco 3620 or Cisco 3640router.Note In this document, the term “Cisco 3600 series” refers to the Cisco 3620 and Cisco 3640routers.This document is intended for the power supply installer, who should be familiar with electroniccircuitry and wiring practices and have experience as an electronic or electromechanical technician.Use this document in conjunction with your router installation and configuration guide and theRegulatory Compliance and Safety Information document for your router.If you have questions or need help, refer to the section “Obtaining Service and Support” later in thisdocument.This document contains the following sections:• Safety Recommendations, page 3• Overview of Cisco 3600 Series Power Supplies, page 4• Tools and Equipment Required, page 6• Removing the Cover, page 7• Removing the Power Supply, page 10• Installing the Power Supply, page 1578-3858-01