Cisco 2821 - Integrated Services Router Unified Communications Bundle Configuration

Also see for 2800 Series: Datasheet Hardware installation guide Guide Guide Application note

Contents

Corporate Headquarters:Copyright © 2004 Cisco Systems, Inc. All rights reserved.Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USAPower Up and Initial Configuration Proceduresfor Cisco 2800 Series RoutersThis document describes how to power up your Cisco 2800 series integrated services router and performan initial configuration to provide network access. It includes the following sections:• Powering Up Cisco 2800 Series Routers, page 1• Configuring the Router, page 4Powering Up Cisco 2800 Series RoutersWarning Blank faceplates and cover panels serve three important functions: they prevent exposure tohazardous voltages and currents inside the chassis; they contain electromagnetic interference (EMI)that might disrupt other equipment; and they direct the flow of cooling air through the chassis. Do notoperate the system unless all cards, faceplates, front covers, and rear covers are in place. Statement1029This section covers the following topics:• Checklist for Power Up, page 1• Power Up Procedure, page 2• Verifying the Front Panel LED Indications, page 3• Verifying the Hardware Configuration, page 4Checklist for Power UpYou are ready to power up the Cisco router if the following steps are completed:• Chassis is securely mounted and grounded.• Power and interface cables are connected.