Cisco 2651 User Manual

Also see for 2621XM: Operations Hardware installation guide Configuration guide User guide

Corporate Headquarters:Copyright © 2004 Cisco Systems, Inc. All rights reserved.Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USACisco 1721, 1760, 2621XM, 2651XM, 2691, 3725,and 3745 Modular Access Routers and 7206-VXRNPE-400 Router FIPS 140-2 Non-ProprietarySecurity PolicyLevel 2 ValidationVersion 2.4November 19, 2004IntroductionThis is the non-proprietary Cryptographic Module Security Policy for the Cisco 1721, 1760, 2621XM,2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 routers. This security policy describes how therouters meet the security requirements of FIPS 140-2, and how to operate the routers in a secure FIPS140-2 mode. This policy was prepared as part of the Level 2 FIPS 140-2 certification of the routers.FIPS 140-2 (Federal Information Processing Standards Publication 140-2—Security Requirements forCryptographic Modules) details the U.S. Government requirements for cryptographic modules. Moreinformation about the FIPS 140-2 standard and validation program is available on the NIST website athttp://csrc.nist.gov/cryptval/.This document contains the following sections:• Introduction, page 1• The Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 Routers,page 3• Secure Operation of the Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXRNPE-400 Routers, page 42• Related Documentation, page 44• Obtaining Documentation, page 45• Documentation Feedback, page 46