Cisco 2000 Series Hardware Installation

Also see for 2000 Series: Configuration guide

1Cisco 2000 Series Hardware InstallationCisco 2000 Series Hardware InstallationFollowing is the information required to install the router chassis.About This GuideFollow this procedural path to install your router:1 Install the router hardware using the procedures described in this publication.2 After the hardware is installed, refer the Router Products Getting Started Guide orto the appropriate software publication to configure the router.3 Refer to the “Reference” section in this publication for cabling and basictroubleshooting information.InstallationThis section guides you through the installation of the router and includes informationon safety, inspecting the system, preventing electrostatic discharge (ESD) damage,tools and parts required, rack mounting, wall mounting, and making external cableconnections.Note If you have questions about agency approvals, basic troubleshooting, systemspecifications, or specific cable pinout information, review the information in thesection “Reference” on page 9.Safety RecommendationsFollow these guidelines to ensure general safety:• Keep the router area clear and dust-free during and after installation.• Put the removed router cover in a safe place.• Keep tools away from walk areas where you and others could trip over them.• Do not wear loose clothing that could get caught in the router chassis. Fasten yourtie or scarf and sleeves.• Wear safety glasses when working under any conditions that might be hazardous toyour eyes.• Do not perform any action that creates a potential hazard to people or makes theequipment unsafe.