Americas Headquarters:© 2008 Cisco Systems, Inc. All rights reserved.Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USARelease Notes forCisco Configuration Professional Express 1.0May 19, 2008These release notes support Cisco Configuration Professional Express (Cisco CP Express) 1.0. Theyshould be used with the documents listed in the “Related Documentation” section on page 15 and inparticular, the Release Notes for Cisco Configuration Prefessional.These release notes are updated as needed. To ensure that you have the latest version of these releasenotes, go to http://www.cisco.com/go/ciscocp. In the Support box, click General Information >Release Notes. Then, find the latest release notes for your release.ContentsThis document contains the following sections:• Introduction, page 1• System Requirements, page 2• Installation Notes, page 8• Limitations and Restrictions, page 9• Important Notes, page 9• Caveats, page 12• Related Documentation, page 15IntroductionCisco CP Express is a graphical configuration tool that enables a user to configure a LAN and WANconnection, make security settings to protect the router, and, configure a basic firewall, and NetworkAddress Translation. Cisco CP Express is installed in Flash memory on routers shipped with CiscoConfiguration Professional (Cisco CP).