Cisco 1503 Software Manual

C H A P T E RUsing Your Hub Software 3-13Using Your Hub SoftwareThis chapter describes procedures for configuring the Cisco Micro Hub, and contains thefollowing sections:• Preparing for Configuration• Configuring the Hub• Command SummaryPreparing for ConfigurationTo configure any Cisco Micro Hubs in a stack, the stack must include at least oneMicro Hub 1503. You can connect to the Micro Hub 1503 to configure it in one of twoways:• Direct Connection through the CONSOLE Port• Connection Using TelnetDirect Connection through the CONSOLE PortYou can configure the Micro Hub 1503, by connecting a terminal or a PC directly to thehub’s CONSOLE port as described in the section “Connecting the CONSOLE Port” in thechapter “Installing Your Hub.”