Menu
Cisco 1121 Quick Start Manual
        |
1Cisco Systems, Inc. www.cisco.comIntroducing the Cisco 1121 Secure AccessControl System HardwareThis chapter gives an overview of the Cisco Secure Access Control System (CSACS-1121) hardware. It covers theappliance hardware, major components, controls, connectors, and front- and rear-panel LED indicators.This chapter contains: Product Overview, page 1 Hardware Features, page 3 Regulatory Compliance, page 7Product OverviewThis section describes the power requirements, rack-mount hardware kit, and features of the CSACS-1121 Seriesappliance.This section contains: CSACS-1121 Series Appliance Overview, page 1 Product Serial Number Location, page 2 Cisco Product Identification Tool, page 3CSACS-1121 Series Appliance OverviewThe CSACS-1121 Series appliance (see Figure 1 on page 1) is contained in a standard shelf-rack enclosure. Theappliance weighs from 24.25 lb (11.0 kg) to 28.0 lb (12.7 kg). It measures 1.75 inches high x 17.3 inches wide x22.0 inches deep (44.5 mm x 440.0 mm x 559.0 mm). These dimensions do not include the rack handles.Figure 1 Cisco 1121 Secure Access Control System Front ViewThe CSACS-1121 Series appliance is configured for AC-input power and has a single auto-ranging AC-input powersupply, mounted in a standard 19-inch (48.3 cm), 4-post equipment rack (using the rack-mount brackets provided). TheCSACS-1121 features include: Microprocessor—Intel Core 2 Duo 2.4-GHz processor with an 800-MHz front side bus (FSB) and 2 MB of Layer 2cache. Four synchronous dynamic RAM (SDRAM) slots that are installed with 4 GB.195212Cisco 1121 SecureAccrss Control System CISCO |
Related manuals for Cisco 1121
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved