Cisco 10008 Installation And Configuration Manual

Also see for 10008: Software configuration guide Quick start guide Hardware installation guide

Contents

Corporate Headquarters:© 2008 Cisco Systems, Inc. All rights reserved.Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USACisco 10008 Router PRE4 Installation andConfiguration GuideProduct Number: ESR-PRE4This publication contains instructions for installing and upgrading the Performance Routing Engine 4(PRE4) in a Cisco 10008 router.Feature Information for the PRE4Table 1 describes the release history for this feature. The table lists only the Cisco IOS software releasethat introduced support for a given feature in a given Cisco IOS software release train. Unless notedotherwise, subsequent releases of that Cisco IOS software release train also support that feature.Finding Support Information for Platforms and Cisco IOS Software ImagesUse Cisco Feature Navigator to find information about platform support and Cisco IOS software imagesupport. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account onCisco.com. If you do not have an account or have forgotten your username or password, click Cancel atthe login dialog box and follow the instructions that appear.Table 1 Feature Information for the PRE4Feature Name Releases Feature InformationPRE4 12.2(33)SB The PRE4 is the fifth generation PXF packet processingand scheduling engine for the Cisco 10008 router.