Cisco 1000 ISR Series Installation And Connection

Contents

Install and Connect the RouterThis chapter describes how to install and connect Cisco 1000 Series Integrated Services Router (ISR) to LANand WAN networks.Read the installation instructions before using, installing or connecting the system to the power source.Statement 1004WarningInstalling the Cisco 1000 Series Integrated Services Routers involve these tasks:• Unpack the Router, on page 1• Set up Router on Desktop, Rack, or Wall, on page 1• Connect Power Cable, on page 19• Connect the Router to a Console, on page 21• Connect WAN and LAN Interfaces, on page 25• Configure the Router at Startup, on page 26Unpack the RouterUnpack the router only when you are ready to install it. If the installation site is not ready, to prevent accidentaldamage, keep the chassis in its shipping container until you are ready to install.The router, accessory kit, publications, and any optional equipment you order may be shipped in more thanone container. When you unpack the containers, check the packing list to ensure that you have received alllisted items.Set up Router on Desktop, Rack, or WallAfter unpacking, based on your requirements, you can set up a Cisco 1100 Series Integrated Services Routers(ISRs) on a desktop, a rack, or the wall.Install and Connect the Router1