Menu
Capture DVR4250 Instruction Manual
                                                             | |
Contents
| 
479.4.3.2 DHCPThe “DHCP” is automatically set as the default network setting of the NetworkDVR. When a Network DVR is connected into the LAN, it will issue DHCPpackets to request an IP address that is dynamically assigned by the DHCP server. Ifit is unable to get a DHCP address on a limited tries, the Network DVR will assigna default IP address such as “169.254.1.13”.9.4.3.3 Connect to ADSL by PPPoE modeTo setup follow the steps below:1. After setup, rebooting enables automatic connection to ADSL.2. Enter the “Username” and “Password” fields with the account and passwordprovided by the ISP.3. If item “Send mail after connected” is selected, the mail will be automaticallysent when connected to the ISP.4. Click “OK” button to save the settings.Note: In order to activate the function, it is necessary to reboot the device after thesetup.ADSL Setting DisplayIf the Network DVR and ADSL modem are connected by a hub, the user can selectitem “Dial On Power Up” to perform the connect operation. On contrary, if theNetwork DVR and ADSL modem are connected directly, then please note thefollowing steps below:12 |
Related manuals for Capture DVR4250
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved