Caple CM110GM Instruction Manual

Contents

Caple CM110GM Instruction Manual Manual pdf 21 page image

Instruction manual CM110GM21Please keep this instruction manual for future referencePress the PROG button to select the following functions.M I C R O W AV E :Default power P100 (power range P10-P100).To adjust the power, press until the correct power isreached followed by SELECT.Default time is 30 seconds. To adjust the time press the buttonfollowed by the and SELECT to confirm.The time will increase in 30 seconds increments (Max 60mins).Note: The Duration time when using the microwave function willdisplay ‘minutes : seconds’, in all other functions it will show‘hours : minutes’.Finally press to start the programme.D E F R O S T:Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by theand SELECT to confirm.Finally press to start the programme. The default time will beadjusted according to the set weight (See the ‘Defrost time table’ formore info).FA N H E AT:Default temperature 200°CTo adjust the temperature press °C/W/g followed by . PressSELECT to confirm.The default time is 1.00hr. To Adjust the time, press the buttonfollowed by the and SELECT to confirm.Finally press to start the programme.T U R B O G R I L L :Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by . PressSELECT to confirm.The default time is 1.00hr. To Adjust the time, press the buttonfollowed by the and SELECT to confirm.Finally press to start the programme.T U R B O C O N V E N T I O N A L :Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by . PressSELECT to confirm.The default time is 1.00hr. To Adjust the time, press the buttonfollowed by the and SELECT to confirm.Finally press to start the programme.Turbo grill - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECTto confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Microwave & Fan heatMicrowave default power P50 (Power range P10-P50).Fan heat default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the fan heat temperature mode. These can both then be adjusted using the/ keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followedby the / and SELECT to confirm.Finally press to start the programme.MICROWAVE OVEN FUNCTIONSPress PROG to select the following functions:Symbol Description DisplayMicrowave & Turbo grillMicrowave default power P50 (Power range P10-P50).Turbo grill default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the Turbo grill temperature mode. These can both then be adjusted usingthe / keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followedby the / and SELECT to confirm.Finally press to start the programme.Microwave & Turbo conventional heatMicrowave default power P50 (Power range P10-P50).Turbo grill default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the Turbo conventional temperature mode. These can both then beadjusted using the / keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Microwave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo conventional - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo grill - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECTto confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Microwave & Fan heatMicrowave default power P50 (Power range P10-P50).Fan heat default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the fan heat temperature mode. These can both then be adjusted using the/ keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followedby the / and SELECT to confirm.Finally press to start the programme.MICROWAVE OVEN FUNCTIONSPress PROG to select the following functions:Symbol Description DisplayMicrowave & Turbo grillMicrowave default power P50 (Power range P10-P50).Turbo grill default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the Turbo grill temperature mode. These can both then be adjusted usingthe / keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followedby the / and SELECT to confirm.Microwave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo conventional - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo grill - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECTto confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Microwave & Fan heatMicrowave default power P50 (Power range P10-P50).Fan heat default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the fan heat temperature mode. These can both then be adjusted using the/ keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followedby the / and SELECT to confirm.Finally press to start the programme.MICROWAVE OVEN FUNCTIONSPress PROG to select the following functions:Symbol Description DisplayMicrowave & Turbo grillMicrowave default power P50 (Power range P10-P50).Turbo grill default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toMicrowave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo conventional - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo grill - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECTto confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Microwave & Fan heatMicrowave default power P50 (Power range P10-P50).Fan heat default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the fan heat temperature mode. These can both then be adjusted using the/ keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followedby the / and SELECT to confirm.Finally press to start the programme.MICROWAVE OVEN FUNCTIONSPress PROG to select the following functions:Symbol Description DisplayMicrowave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo conventional - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo grill - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECTto confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Microwave & Fan heatMicrowave default power P50 (Power range P10-P50).Fan heat default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the fan heat temperature mode. These can both then be adjusted using the/ keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followedby the / and SELECT to confirm.MICROWAVE OVEN FUNCTIONSPress PROG to select the following functions:Symbol Description DisplayMicrowave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo conventional - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.e settinge zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:l time settings can be operated by pressing / , SELECT, andrm settingset the Alarm/minute minder, press the button until the symbol starts to flash. Use /adjust the time, and then press SELECT to confirm. If you want to cancel the alarm, set the alarme back to '0.00' and press SELECT to confirm.en the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. Top the alarm, press either , , or SELECT.ting the timeset the time, turn the oven on, and then press and hold the button for 3 seconds until thee begins to flash. Adjust the time using the / and then press SELECT to confirm.en the oven is first turned on or restarts, the time must be set before using the oven.ration cooking(0-10hrs)ce a function and temperature have been selected, press the button and the Duration timel start to flash. press / to adjust the time, and then SELECT to confirm. Once the time isthe alarm will sound and the oven will switch off.ss any of the buttons to turn off the alarmcancel Duration cooking set the cooking time to '0:00' and confirm./ , SELECT, andcooking timece the Duration cooking time has been set, press twice and the End cooking time shouldrt to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.r oven will then work out when to turn on, so that it cooks for the required duration time, andshes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function andperature (start time = End time - duration time).ld lockss and hold SELECT for 5 seconds to set the child lock. The symbol will appear in the displaye activated.cancel the Child lock, press and hold SELECT again for 5 seconds. The symbol will disappearm the display once deactivated.gan show “Time, Duration time, End of cooking time and Alarm” in this sequence:ttings can be operated by pressing / , SELECT, andnglarm/minute minder, press the button until the symbol starts to flash. Use /e time, and then press SELECT to confirm. If you want to cancel the alarm, set the alarmo '0.00' and press SELECT to confirm.ime is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. Torm, press either , , or SELECT.timeime, turn the oven on, and then press and hold the button for 3 seconds until theto flash. Adjust the time using the / and then press SELECT to confirm.ven is first turned on or restarts, the time must be set before using the oven.oking(0-10hrs)tion and temperature have been selected, press the button and the Duration timeflash. press / to adjust the time, and then SELECT to confirm. Once the time ism will sound and the oven will switch off.f the buttons to turn off the alarmuration cooking set the cooking time to '0:00' and confirm./ , SELECT, andg timeuration cooking time has been set, press twice and the End cooking time shouldh. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.ill then work out when to turn on, so that it cooks for the required duration time, andhe required end time. E.g. Duration time set at 30 minutes, and the end time set toven will automatically turn on at 17.45 and cook for 30 minutes on the set function ande (start time = End time - duration time).old SELECT for 5 seconds to set the child lock. The symbol will appear in the displayted.e Child lock, press and hold SELECT again for 5 seconds. The symbol will disappearsplay once deactivated.Time settingTime zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:All time settings can be operated by pressing / , SELECT, andAlarm settingTo set the Alarm/minute minder, press the button until the symbol starts to flash. Use /to adjust the time, and then press SELECT to confirm. If you want to cancel the alarm, set the alarmtime back to '0.00' and press SELECT to confirm.When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. Tostop the alarm, press either , , or SELECT.Setting the timeTo set the time, turn the oven on, and then press and hold the button for 3 seconds until thetime begins to flash. Adjust the time using the / and then press SELECT to confirm.when the oven is first turned on or restarts, the time must be set before using the oven.Duration cooking(0-10hrs)Once a function and temperature have been selected, press the button and the Duration timewill start to flash. press / to adjust the time, and then SELECT to confirm. Once the time isup, the alarm will sound and the oven will switch off.Press any of the buttons to turn off the alarmTo cancel Duration cooking set the cooking time to '0:00' and confirm./ , SELECT, andEnd cooking timeOnce the Duration cooking time has been set, press twice and the End cooking time shouldstart to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.Your oven will then work out when to turn on, so that it cooks for the required duration time, andfinishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function andtemperature (start time = End time - duration time).Child lockPress and hold SELECT for 5 seconds to set the child lock. The symbol will appear in the displayonce activated.To cancel the Child lock, press and hold SELECT again for 5 seconds. The symbol will disappearfrom the display once deactivated.Time settingTime zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:All time settings can be operated by pressing / , SELECT, andAlarm settingTo set the Alarm/minute minder, press the button until the symbol starts to flash. Use /to adjust the time, and then press SELECT to confirm. If you want to cancel the alarm, set the alarmtime back to '0.00' and press SELECT to confirm.When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. Tostop the alarm, press either , , or SELECT.Setting the timeTo set the time, turn the oven on, and then press and hold the button for 3 seconds until thetime begins to flash. Adjust the time using the / and then press SELECT to confirm.when the oven is first turned on or restarts, the time must be set before using the oven.Duration cooking(0-10hrs)Once a function and temperature have been selected, press the button and the Duration timewill start to flash. press / to adjust the time, and then SELECT to confirm. Once the time isup, the alarm will sound and the oven will switch off.Press any of the buttons to turn off the alarmTo cancel Duration cooking set the cooking time to '0:00' and confirm./ , SELECT, andEnd cooking timeOnce the Duration cooking time has been set, press twice and the End cooking time shouldstart to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.Your oven will then work out when to turn on, so that it cooks for the required duration time, andfinishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function andtemperature (start time = End time - duration time).Child lockPress and hold SELECT for 5 seconds to set the child lock. The symbol will appear in the displayonce activated.To cancel the Child lock, press and hold SELECT again for 5 seconds. The symbol will disappearfrom the display once deactivated.me settingme zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:ll time settings can be operated by pressing / , SELECT, andlarm settingo set the Alarm/minute minder, press the button until the symbol starts to flash. Use /adjust the time, and then press SELECT to confirm. If you want to cancel the alarm, set the alarmme back to '0.00' and press SELECT to confirm.hen the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. Toop the alarm, press either , , or SELECT.etting the timeo set the time, turn the oven on, and then press and hold the button for 3 seconds until theme begins to flash. Adjust the time using the / and then press SELECT to confirm.hen the oven is first turned on or restarts, the time must be set before using the oven.uration cooking(0-10hrs)nce a function and temperature have been selected, press the button and the Duration timeill start to flash. press / to adjust the time, and then SELECT to confirm. Once the time isp, the alarm will sound and the oven will switch off.ress any of the buttons to turn off the alarmo cancel Duration cooking set the cooking time to '0:00' and confirm./ , SELECT, andnd cooking timence the Duration cooking time has been set, press twice and the End cooking time shouldart to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.our oven will then work out when to turn on, so that it cooks for the required duration time, andnishes at the required end time. E.g. Duration time set at 30 minutes, and the end time set to8.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on the set function andmperature (start time = End time - duration time).hild lockress and hold SELECT for 5 seconds to set the child lock. The symbol will appear in the displayme settingme zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:ll time settings can be operated by pressing / , SELECT, andlarm settingo set the Alarm/minute minder, press the button until the symbol starts to flash. Use /adjust the time, and then press SELECT to confirm. If you want to cancel the alarm, set the alarmme back to '0.00' and press SELECT to confirm.hen the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. Toop the alarm, press either , , or SELECT.tting the timeo set the time, turn the oven on, and then press and hold the button for 3 seconds until theme begins to flash. Adjust the time using the / and then press SELECT to confirm.hen the oven is first turned on or restarts, the time must be set before using the oven.uration cooking(0-10hrs)nce a function and temperature have been selected, press the button and the Duration timeill start to flash. press / to adjust the time, and then SELECT to confirm. Once the time isp, the alarm will sound and the oven will switch off.ess any of the buttons to turn off the alarmcancel Duration cooking set the cooking time to '0:00' and confirm./ , SELECT, andTime settingTime zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:All time settings can be operated by pressing / , SELECT, andAlarm settingTo set the Alarm/minute minder, press the button until the symbol starts to flash. Use /to adjust the time, and then press SELECT to confirm. If you want to cancel the alarm, set the alarmtime back to '0.00' and press SELECT to confirm.When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. Tostop the alarm, press either , , or SELECT.Setting the timeTo set the time, turn the oven on, and then press and hold the button for 3 seconds until thetime begins to flash. Adjust the time using the / and then press SELECT to confirm.when the oven is first turned on or restarts, the time must be set before using the oven.Duration cooking(0-10hrs)Once a function and temperature have been selected, press the button and the Duration timewill start to flash. press / to adjust the time, and then SELECT to confirm. Once the time isup, the alarm will sound and the oven will switch off.Press any of the buttons to turn off the alarmTo cancel Duration cooking set the cooking time to '0:00' and confirm./ , SELECT, andEnd cooking timeOnce the Duration cooking time has been set, press twice and the End cooking time shouldstart to flash. Adjust the time to the time you wish cooking to stop and press SELECT to confirm.Your oven will then work out when to turn on, so that it cooks for the required duration time, andTime settingTime zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:All time settings can be operated by pressing / , SELECT, andAlarm settingTo set the Alarm/minute minder, press the button until the symbol starts to flash. Use /to adjust the time, and then press SELECT to confirm. If you want to cancel the alarm, set the alarmtime back to '0.00' and press SELECT to confirm.When the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. Tostop the alarm, press either , , or SELECT.Setting the timeTo set the time, turn the oven on, and then press and hold the button for 3 seconds until thetime begins to flash. Adjust the time using the / and then press SELECT to confirm.when the oven is first turned on or restarts, the time must be set before using the oven.Duration cooking(0-10hrs)ime settingime zone can show “Time, Duration time, End of cooking time and Alarm” in this sequence:ll time settings can be operated by pressing / , SELECT, andlarm settingo set the Alarm/minute minder, press the button until the symbol starts to flash. Use /o adjust the time, and then press SELECT to confirm. If you want to cancel the alarm, set the alarmime back to '0.00' and press SELECT to confirm.hen the time is up, the alarm will sound for 90 seconds, and the symbol will begin to flash. Totop the alarm, press either , , or SELECT.etting the timeo set the time, turn the oven on, and then press and hold the button for 3 seconds until theAlarm settingTo set the Alarm/minute minder, press the button until the symbol startsto adjust the time, and then press SELECT to confirm. If you want to cancel the altime back to '0.00' and press SELECT to confirm.When the time is up, the alarm will sound for 90 seconds, and the symbol willstop the alarm, press any button.Setting the timeTo set the time, turn the oven on, and then press and hold the button for 3 stime begins to flash. Adjust the time using the / and then press SELECT towhen the oven is first turned on or restarts, the time must be set before using theDuration cooking(0-10hrs)Once a function and temperature have been selected, press the button and twill start to flash. press / to adjust the time, and then SELECT to confirm.up, the alarm will sound and the oven will switch off.Press any of the buttons to turn off the alarm / , SELECT, andTo cancel Duration cooking set the cooking time to '0:00' and confirm.End cooking timeOnce the Duration cooking time has been set, press twice and the End cookinstart to flash. Adjust the time to the time you wish cooking to stop and press SELEYour oven will then work out when to turn on, so that it cooks for the required dufinishes at the required end time. E.g. Duration time set at 30 minutes, and the en18.15, the oven will automatically turn on at 17.45 and cook for 30 minutes on thtemperature (start time = End time - duration time).Alarm settingTo set the Alarm/minute minder, press the button until the symbol startsto adjust the time, and then press SELECT to confirm. If you want to cancel the altime back to '0.00' and press SELECT to confirm.When the time is up, the alarm will sound for 90 seconds, and the symbol willstop the alarm, press any button.Setting the timeTo set the time, turn the oven on, and then press and hold the button for 3 stime begins to flash. Adjust the time using the / and then press SELECT towhen the oven is first turned on or restarts, the time must be set before using theDuration cooking(0-10hrs)Once a function and temperature have been selected, press the button and twill start to flash. press / to adjust the time, and then SELECT to confirm.up, the alarm will sound and the oven will switch off.Press any of the buttons to turn off the alarm / , SELECT, andTo cancel Duration cooking set the cooking time to '0:00' and confirm.Alarm settingTo set the Alarm/minute minder, press the button until the symbol startsto adjust the time, and then press SELECT to confirm. If you want to cancel the altime back to '0.00' and press SELECT to confirm.When the time is up, the alarm will sound for 90 seconds, and the symbol willstop the alarm, press any button.Setting the timeTo set the time, turn the oven on, and then press and hold the button for 3 stime begins to flash. Adjust the time using the / and then press SELECT towhen the oven is first turned on or restarts, the time must be set before using theDuration cooking(0-10hrs)Once a function and temperature have been selected, press the button and tAlarm settingTo set the Alarm/minute minder, press the button until the symbol startsto adjust the time, and then press SELECT to confirm. If you want to cancel the altime back to '0.00' and press SELECT to confirm.When the time is up, the alarm will sound for 90 seconds, and the symbol willstop the alarm, press any button.Setting the timeTurbo grill - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECTto confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Microwave & Fan heatMicrowave default power P50 (Power range P10-P50).Fan heat default temperature 200°C (Temperature range 50-220°C).CROWAVE OVEN FUNCTIONSs PROG to select the following functions:ymbol DescriptionMicrowave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo conventional - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo grill - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECTto confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.CROWAVE OVEN FUNCTIONSs PROG to select the following functions:ymbol DescriptionMicrowave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo conventional - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Turbo grill - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECTto confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.CROWAVE OVEN FUNCTIONSs PROG to select the following functions:ymbol DescriptionMicrowave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.CROWAVE OVEN FUNCTIONSs PROG to select the following functions:ymbol DescriptionMicrowave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.CROWAVE OVEN FUNCTIONSs PROG to select the following functions:ymbol DescriptionMicrowave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedTurbo grill - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECTto confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Microwave & Fan heatMicrowave default power P50 (Power range P10-P50).Fan heat default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the fan heat temperature mode. These can both then be adjusted using the/ keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followedby the / and SELECT to confirm.Finally press to start the programme.MICROWAVE OVEN FUNCTIONSPress PROG to select the following functions:Symbol Description DisplayMicrowave & Turbo grillMicrowave default power P50 (Power range P10-P50).Turbo grill default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the Turbo grill temperature mode. These can both then be adjusted usingthe / keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followedby the / and SELECT to confirm.Microwave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo conventional - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo grill - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECTto confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Microwave & Fan heatMicrowave default power P50 (Power range P10-P50).Fan heat default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the fan heat temperature mode. These can both then be adjusted using the/ keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followedby the / and SELECT to confirm.Finally press to start the programme.MICROWAVE OVEN FUNCTIONSPress PROG to select the following functions:Symbol Description DisplayMicrowave & Turbo grillMicrowave default power P50 (Power range P10-P50).Turbo grill default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the Turbo grill temperature mode. These can both then be adjusted usingMicrowave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo conventional - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo grill - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECTto confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Microwave & Fan heatMicrowave default power P50 (Power range P10-P50).Fan heat default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the fan heat temperature mode. These can both then be adjusted using the/ keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followedby the / and SELECT to confirm.Finally press to start the programme.MICROWAVE OVEN FUNCTIONSPress PROG to select the following functions:Symbol Description DisplayMicrowave & Turbo grillMicrowave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo conventional - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo grill - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECTto confirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Microwave & Fan heatMicrowave default power P50 (Power range P10-P50).Fan heat default temperature 200°C (Temperature range 50-220°C).Press °C/W/g once to enter the Microwave power mode, and then again toenter the fan heat temperature mode. These can both then be adjusted using the/ keys followed by SELECT to confirm.The default time is 1.00hr. To Adjust the time, press the button followedby the / and SELECT to confirm.MICROWAVE OVEN FUNCTIONSPress PROG to select the following functions:Symbol Description DisplayMicrowave – Default power P100 (power range P10-P100).To adjust the power, press / until the correct power is reached followed bySELECT.Default time is 1 minute. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Defrost - Default weight 1000g (weight range 100-2000g).To adjust the weight press the °C/W/g button followed by the / andSELECT to confirm.Finally press to start the programme. The default time will be adjustedaccording to the set weight (See the 'Defrost time table' for more info).Fan heat - Default temperature 200°CTo adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.Turbo conventional - Default temperature 200°C (Temperature range 50-220°C).To adjust the temperature press °C/W/g followed by / . Press SELECT toconfirm.The default time is 1.00hr. To Adjust the time, press the button followed bythe / and SELECT to confirm.Finally press to start the programme.M I C R O W A V E O V E N F U N C T I O N S