Capital Precision Series Use And Installation Manual

Also see for Precision Series GSCR486Q: User and installation guide Use and installation guide Specifications Specifications Specifications

Contents

Capital Precision Series Use And Installation Manual Manual pdf 38 page image

NOTE: NO air shutter adjustment is necessary orpossible with the sealed top burners.NOTE: If the sealed burners do not ignite andthere is NO clicking sound, turn OFF the gas andcheck for tripped circuit breakers, blown fuse orwire connection to the igniter.INSTALLER CHECKLISTFINAL CHECKLISTq Placement of unitq Specified clearances maintained to cabinet surfacesq Unit Level – front to back – side to sideq Burner caps positioned properly on sealed burner basesq All packing materials removedq Island trim or back guard attached (if horizontalclearance to combustible materials behindcooking surface is less than 12”)q Check door adjustment and hold down bracketsGAS SUPPLYq Connection: 1/2” NPT with a minimum of 5/8”diameter flex lineq The appliance is connected only to the type of gasfor which it is certified for useq Manual gas shut-off valve installed in an accessiblelocation (without requiring removal of range)q Unit tested and free of gas leaksq Gas supply pressure does not exceed 14” (37 mb) W.C.ELECTRICALq Receptacle with correct over current protection isprovided for service cord connectionq Proper ground connectionq Proper polarity at receptacleq Kick panel in place and 3 screws secure.OPERATIONq All internal packing materials removed. Checkbelow grates and grill pans and within ovensq If used on Propane gas, verify that the propanegas supply is equipped with its own high-pressureregulator in addition to the pressure regulatorsupplied with appliance.q Burner caps properly seated into burner bases.q Grill Components properly seated (not all models).q Bezels centered on burner knobs and knobs turn freely.q Each burner lights satisfactorily, both individuallyand with other burners operatingq Air shutter adjustment for proper flame made forGrill and Griddle sections.q Griddle is level and does not rock.q Oven door hinges seated and hinge locks in properposition. Door opens and closes properly.q Burner grates correctly positioned, level and donot rock.Note to Customer:Please make sure installer signs each item on thischecklist, explains each item before leaving.P O S T - I N S T A L L C H E C K