Canyon CN-WF518 User Manual

Contents

Canyon CN-WF518 User Manual Manual pdf 22 page image

17Parameter DescriptionPower Consumption Setting Continuous Access Mode (CAM) – The adapter will always setin active mode.Maximum Power-Saving Mode – Enable the adapter in thepower saving mode when it is idle.Fast Power-Saving Mode – Enable the adapter in the powersaving mode when it is idle, but some components of the adapteris still alive. In this mode, the power consumption is larger than“Max“ mode.Fragementation Threshold The value defines the maximum size of packets, any packet sizelarger than the value will be fragmented. If you have decreasedthis value and experience high packet error rates, you canincrease it again, but it will likely decrease overall networkperformance. Select a setting within a range of 256 to 2346 bytes.Minor change is recommended.RTS / CTS Threshold Minimum packet size required for an RTS/CTS (Request ToSend/Clear to Send). For packets smaller than this threshold, anRTS/CTS is not sent and the packet is transmitted directly to theWLAN. Select a setting within a range of 0 to 2347 bytes. Minorchange is recommended3.5 Software AP ModeThis adapter can run as a wireless AP. The relative configurations of the AP includingchannel, SSID, MAC Address Filtering, WEP encryption and so on are described as follows.