Canon optura50 Instruction Manual

Also see for 0329B001 - Optura 60 Camcorder: Software guide Instruction manual Instruction manual Specifications

Contents

Canon optura50 Instruction Manual Manual pdf 143 page image

143Trouble?EPAPER AND INK DONOT MATCHThe ink cannot be used with the selected paper type.WASTE TANK FULL Waste tank is full. Select [CONTINUE] to restart printing. Consult yourdealer or a Canon Service Center listed in the Contact List provided withthe printer or the printer manual to replace the waste tank (waste inkabsorber).FILE ERROR You attempted to print an image that was recorded with anothercamcorder, with a different compression, or was edited on a computer.CANNOT PRINT! You attempted to print an image that was recorded with anothercamcorder, with a different compression, or was edited on a computer.COULD NOT PRINT XIMAGESYou attempted to use the print order settings to print X images that wererecorded with another camcorder, with a different compression or wereedited on a computer.SET PRINT ORDER You attempted to print an image from the CARD PLAY menu[ PRINT] without having set the print order.PRINT ORDERERRORYou attempted to set more than 998 still images in the print order.CANNOT TRIM You attempted to trim an image that was recorded with anothercamcorder.READJUST TRIMMING You changed the print style after you set the trimming settings.PRINTER ERROR Cancel printing. Turn off the printer and turn it back on. Check the printerstatus. If the error persists, consult your dealer or a Canon ServiceCenter listed in the Contact List provided with the printer or the printermanual.PRINT ERROR Cancel printing, disconnect the USB cable and turn off the printer. After awhile, turn the printer back on and reconnect the USB cable. Check theprinter status. If the error persists, consult your dealer or a CanonService Center listed in the Contact List provided with the printer or theprinter manual.When you are printing using the button, check the print settings.HARDWARE ERROR Cancel printing. Turn off the printer and turn it back on. Check the printerstatus. If the printer is equipped with a battery, it might be exhausted. Insuch case, turn off the printer, replace the battery and turn it back on. Ifthe error persists, consult your dealer or a Canon Service Center listed inthe Contact List provided with the printer or the printer manual.RECHARGE THEPRINTER BATTERYThe printer battery is depleted.COMMUNICATIONERRORThe printer is experiencing a data transmission error. Cancel printing,disconnect the USB cable and turn off the printer. After a while, turn theprinter back on and reconnect the USB cable. When you are printingusing the button, check the print settings.Or, you attempted to print from a memory card that contains a largenumber of images. Reduce the number of images.CHECK PRINTSETTINGSThe print setting cannot be used for printing with the button.PRINTER IN USE The printer is in use. Check the printer status.PRINTER WARMING UP Printer is warming up. If the message does not disappear after a fewseconds, check the printer status.PAPER LEVER ERROR Paper lever error occurred. Adjust the paper selection lever to the properposition.PRINTER COVER OPEN Close the printer cover securely.NO PRINTHEAD No print head is installed in the printer or print head is defect. Refer to theinstruction manual of your printer.Message Explanation