File typeSelect a file format from JPEG, BMP, PNG and TIFF.Resolution (DPI)Enter the resolution. Specify a value between 50 dpi and 600 dpi. 300 dpi is set by default.ResolutionBrightnessMove the slider to adjust the brightness. Move it to the left to darken and right to brighten theimage. You can also enter a value (-100 to 100).ContrastMove the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image,thus softening the image. Moving it to the right will increase the contrast of the image, thussharpening the image. You can also enter a value (-100 to 100).Preview or scan images as separate filesSelect this checkbox to preview or scan multiple images as separate files.4. Click Preview to preview the image.The preview image appears on the right.5. Click Scan.When scanning is completed, the scanned image appears in the application.Scanning with WIA Driver 1.0The following is an example of scanning using "Paint."1. Place the document on the Platen.Placing Documents2. Click From scanner or camera from . (Select the command to scan adocument in the application.)3. Select an image type according to the document to be scanned.NoteTo scan with the values previously set in Adjust the quality of the scanned picture, selectCustom Settings.4. Click Adjust the quality of the scanned picture and set the preferences as required.Стор. 574 із 715Scanning with WIA Driver
