Advanced Guide > Printing from a Computer > Printing with Other Application Software > Various Printing Methods >Setting a Page Size and OrientationP400Setting a Page Size and OrientationThe paper size and orientation are essentially determined by the application. When the page size andorientation set for Page Size and Orientation on the Page Setup tab are same as those set with theapplication, you do not need to select them on the Page Setup tab.When you are not able to specify them with the application, the procedure for selecting a page size andorientation is as follows:You can also set page size and Orientation on the Quick Setup tab.1. Open the printer driver setup window2. Select the paper sizeSelect a page size from the Page Size list on the Page Setup tab.3. Set OrientationSelect Portrait or Landscape for Orientation. Check Rotate 180 degrees check box when you want toperform printing with the original being rotated 180 degrees.4. Complete the setupClick OK.When you execute print, the document will be printed with the selected page size and the orientation.NoteIf Normal-size is selected for Page Layout, then Automatically reduce large document that theprinter cannot output is displayed.Normally, you can leave the Automatically reduce large document that the printer cannot outputcheck box checked. During printing, if you do not want to reduce large documents that cannot beprinted on the printer, uncheck the check box.Стор. 246 із 715Setting a Page Size and Orientation
