Canon imageRUNNER iR2270 Service Manual

Also see for imageRunner iR2270: Service manual Service manual Service manual

Contents

Canon imageRUNNER iR2270 Service Manual Manual pdf 27 page image

Chapter 44-14.1 Outline4.1.1 Service Mode Composition 0007-5637The Board's service mode consists of the following 10 items (#1 through #10):#1 SSSW (service soft switch)Use it to register/set up functions related to basic fax services (e.g., error management, echoremedies, communication remedies).#2 MENU (menu switch setting)Use it to register/setup functions needed at time of installation (e.g., NL equalizer,transmission level).#3 NUMERIC Param (numeric parameter settings)Use it to enter numeric parameters.#4 NCU (not to be used for service work)All settings under the item will collectively set in response to the #5 TYPE setting.#5 TYPE (country settings)Use it to cause the Board to automatically set data under #4 NCU so that it complies withthe communication requirements of the country in question.#7 PRINTER (printer functions setup)Use it to register/set up functions related to basic printer services (e.g., reduction forreceived images).#8 CLEAR data initialization)Use it to reset various data to initial settings.#9 TESTUse it to execute various tests.#10 REPORTUse it to print out reports.4.1.2 Using Service Mode 0007-56381)Press the User Mode key " " on the control panel.2)Press the keys 2 and 8 on the keypad at the same time.3) Press the User Mode key " " on the control panel once again.