Canon imageRUNNER iR2270 Service Manual

Also see for imageRUNNER 2870: Media guide Driver guide Specifications Printer guide Network guide

Contents

Canon imageRUNNER iR2270 Service Manual Manual pdf 28 page image

The URL of the LMShttp://www.canon.com/lms/ir/Memo:When users obtain a license key, both the 24-digit number on the license access numbercard and the serial No. (e.g.: ABC01234) of the device to be installed are required. Thedevice serial No. is displayed in the "Serial No." when the counter key of the iR is pressed.(2) Write down the 24-digit number displayed on the Web in the space provided on thelicense access number certificate sheet.Memo:Make sure to transcribe correctly. Give an appropriate explanation to users so that they willkeep the license access number cards surely.(3) Press the Additional function>System settings>License Registration, then input thelicense key in the designated space, and press Start key so that the license key is registeredand the function of the option is validated.If the function fails to be validated, an error message will be displayed. Refer to thefollowings what action to be required."There are not enough required features for install.">> Check if the USB Application Interface Board-D1 is recognized correctly and also checkif the RAM capacity is 512MB."The value for the license key is incorrect. Check the license key.">>Check if the license key issued to another device is used.>>Check if the license key is input wrongly.>>Check if the license key is correct."This function has already enabled.">>Check if the security function has already been enabled.(4) Press the power switch on the control panel for 3 seconds or more. Following theinstructions displayed on the shutdown sequence step by step with operations to selectappropriate items on the touch panel so that the main switch can be ready for turning off.