Canon imageRUNNER ADVANCE 6075 Series Service Manual

Contents

Canon imageRUNNER ADVANCE 6075 Series Service Manual Manual pdf 651 page image

66 6-756-75Troubleshooting > Making Initial Checks > Preparation > Network SettingsTroubleshooting > Making Initial Checks > Preparation > Network Settings■ Setting Sales Company’s HQWhen using devices input in the markets listed below, the default setting of Sales Company’sHQ should be changed before obtaining firmware distributed from CDS. Unless the setting ischanged properly, the desired firmware may not be able to be selected.Market Default Setting of SalesCompany's HQSetting of Sales Company'sHQ after ChangeCanada US CALatin America US/SG LAHong Kong SG HKGo to the following screen to change the setting of Sales Company’s HQ.ServiceTechnicianSetting of Device Service Mode(Level 1)COPIER > FUNCTION > INSTALL > CDS-CTLNOTE:The list below shows the setting of Sales Company’s HQ for CDS-CTS by market.Check and adhere to the appropriate setting for your market.Japan = JP China = CNUSA = US Hong Kong = HKSingapore = SG Australia = AUEurope = NL Canada = CAKorea = KR Latin America= LAT-6-24■ Network Settings1. Connecting to External NetworkThe method of connecting to external network is similar to a normal network connectionmethod. Refer to user manual of the device for details.NOTE:• See User Manual for how to connect the device to the external network.• Before using UGW link or User mode, see the sections below to prepare as required."Enabling UGW Link""Enabling [Update Firmware] Button of User Mode""Enabling [Install Application/Options] Button of User Mode"NOTE:“External Network” here means the network connecting the device to CDS via Internet.2. Confirming URL Setting of Distribution ServerThis section describes how to confirm the URL setting of the distribution server.1. Start [Service Mode] at Level 1.1). Press [Setting/Registration (User Mode)] button on the control panel.2). Press [2] and [8] buttons at a time on the control panel.3). Press [Setting/Registration (User Mode)] button on the control panel.4). [Service Mode] screen is shown.2. Press [Updater] button.F-6-142