What This Machine Can Do2-4Before You Start Using the Machine2Remote User InterfaceThe machine can be connected to a networkusing Ethernet. Connecting to a networkenables you to use the Remote UI.With the Remote UI, you can perform functionsfrom your computer’s Web browser, such asconfirming the status of the machine and joboperations and making various settings.Once the Ethernet interface port is configuredproperly, the machine can be controlled and setup from a computer through the Remote UI andnetwork. (See the Remote UI Guide.)SecurityYou can protect the machine from unauthorizedaccess by setting department/user IDs. If theseIDs are set, only the users who enter the correctID and password can gain access to themachine. (See the System Settings Guide.)If your network is designed to require userauthentication, the machine offers flexiblesolutions as listed below.-Authorized Send(See the Sending and Facsimile Guide.)-IEEE802.1X authentication(See the System Settings Guide.)System MonitorThe System Monitor screen enables you tocheck the status of the machine and cancelcopy, sending (TX)/receiving (RX), and printjobs. The job information is recorded as a logand can be viewed in list form.You can also check the status of consumablesloaded in the machine.(See the Reference Guide.)WebBrowser
