Canon imagePROGRAF iPF8300 Basic Guide No.1 Basic Manual

Also see for imagePROGRAF iPF8300: Brochure Troubleshooting guide Troubleshooting guide Brochure Setup guide

Contents

Canon imagePROGRAF iPF8300 Basic Guide No.1 Basic Manual Manual pdf 2 page image

2Do not set up the printer in any location exposed to alcohol, thinner, or other volatile liquids. If thesesubstances come into contact with electrical components inside the printer, there is a risk of fire orelectrical shock.•This printer generates a low-level magnetic field. Anyone wearing a pacemaker who experiencesdiscomfort while working around the printer should leave the area. Consult a physician beforecontinuing to work around the printer.•Insert the power cable securely and completely into the power source. If the power cable is notinserted completely, this could cause a fire or electrical shock.•Never handle the power cable with wet hands. Doing so may cause electrical shock.•Do not use any power cable other than the one provided. This could cause a fire or electrical shock.Never use the power cable with any other electrical device.•Never cut the power cable or attempt to modify it, and never stretch it or bend it forcefully. Never placea heavy object on the power cable. Damaged sections of the power cable could cause a short circuitand may cause a fire or electrical shock.•Never connect the power cable to a power strip or any power source shared by other electricaldevices. This could cause a fire or electrical shock.•Never knot the power cable or wrap it around itself. This could cause a fire or electrical shock.•Periodically disconnect the power cable and use a dry cloth to wipe away dust that has collected onthe plug and the area around the power outlet. Leaving the power cable plugged in and not cleanedfor a long period, especially in an area subject to dust, oil, and humidity, could cause the insulationmaterial to deteriorate and lead to a fire.•If the printer emits smoke or strange odors, continuing to use the printer may cause a fire or electricalshock. Switch the printer off immediately and remove the power plug from the power outlet. Contactthe nearest service center.•For cleaning, use a cloth dampened in water. Never use flammable solvents such as alcohol,benzene, or thinner. If these substances come into contact with electrical components inside theprinter, there is a risk of fire or electrical shock.•Warning█ Printer Location█ Power SupplySafety PrecautionsFollow the warnings and precautions below to use the printer safely. Do not perform any operations or proceduresother than as described in this manual. Doing so may result in unexpected accidents and can cause a fire orelectrical shocks.█ Pacemakers█ In an Emergency█ Cleaning the Printer