Canon imagePROGRAF iPF650 Basic Manual

Also see for imagePROGRAF iPF750 MFP M40: Install guide Basic guide Brochure Basic guide User guide

Canon imagePROGRAF iPF650 Basic Manual Manual pdf 34 page image

34Replacing the PrintheadAfter the Printhead has been replaced and filled with ink, Head Posi. Adj. (Auto(Advanced)) isperformed if you have selected Rep.P.head Print > On in the Control Panel menu. In this case, followthe instructions displayed for Printhead adjustment.•Never remove an Ink Tank while the system is filling with ink.•If Rep.P.head Print is Off, perform Head Posi. Adj. (Auto(Advanced)) yourself.(→ , If Vertical Lines are Warped or Colors are Misaligned)891011With the nozzles facing down and the metal contactstoward the back, insert the Printhead into the Carriage.Carefully push the printhead firmly into the Carriage,ensuring that the nozzles and metal contacts do not touchthe carriage.Pull the Printhead Fixer Cover down toward the front tolock the Printhead in place.Push the Printhead Fixer Lever toward the back of theprinter until it clicks.Close the Top Cover.Ink now fills the system. It takes about six minutes for inkto fill the system.