Canon imagePROGRAF iPF650 Basic Manual

Also see for imagePROGRAF iPF750 MFP M40: Install guide Basic guide Brochure Basic guide User guide

Canon imagePROGRAF iPF650 Basic Manual Manual pdf 18 page image

18One sheet of paper can be loaded in the Paper Feed Slot at a time. Do not load more than one sheet at a time.This may cause paper jams.•Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.•Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.•Load the paper straight. Loading paper askew will cause an error.•Before feeding paper or printing, make sure the sheet is flat against the Roll Cover. The sheet may jam if it curlsbefore feeding or printing and the trailing edge drops toward the front.•If any paper has been advanced that will not be used, a message is shown requesting you to remove it.Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step.•12Select sheets as the paper source.Slide the Width Guide (a) to align it with the mark for thesize of paper you will load.Loading Sheets in the PrinterLoad sheets in the printer as follows.If a print job was received•Sheets are automatically selected, and the media typeand size specified by the print job are shown on theDisplay Screen. Go to the next step.If no print job was received•Press the Load button.1.2. Press ▲ or ▼ to select Load Cut Sheet, and thenpress the OK button.aOK