4 Press ▲ or ▼ to select Calibration, and then press the OK button.5 Press ▲ or ▼ to select Auto Adjust, and then press the OK button.After the environment measurements and paper are confirmed, and color calibration is executed, the calibra-tion adjustment value is set automatically.Applying Calibration Adjustment Values During PrintingThe application of the calibration adjustment values when printing can be set in the printer driver or on the menu of theControl Panel.However, when the setting value of the printer driver and the setting value of the Control Panel differ, the setting of theprinter driver is prioritized.How to Apply How to OperateConfigure on the printer driver menu. (Windows) Configure Calibration Value.(See "Paper Detailed Settings Dialog Box (Windows).") →P.189Configure on the printer driver menu. (Mac OS X) Configure Calibration Value.(See "Paper Detailed Settings Dialog Box (Mac OS X).") →P.372Configure on the menu of the Control Panel. From Set./Adj. Menu, select Adjust Printer > Calibration > Use Adj. Value.(See "Menu Settings.") →P.663Note• After color calibration, you can use the printer driver to make further color adjustments as necessary.(See "Adjusting the Color in the Printer Driver.") →P.56Checking Color Calibration Execution LogsYou can confirm information of color calibration such as the execution date and executed paper type by the followingmethod.How to Check How to OperateConfirm it on the Control Panel of the printer. From Set./Adj. Menu, select Adjust Printer > Calibration > Calibration Log.(See "Menu Settings.") →P.663Print information about the printer. From Set./Adj. Menu, select Test Print > Status Print.(See "Status Print.") →P.673Confirm with imagePROGRAF Status Monitor.(Windows)On the Information sheet of imagePROGRAF Status Monitor, click the View Calibration Logbutton.(See "The Features of imagePROGRAF Status Monitor.") →P.732Confirm this in the Printer Information dialogbox of the printer driver. (Mac OS X)In the Printer Information dialog box, click the Information tab, and click the View Calibra-tion Log button.(See "Main Pane (Mac OS X).") →P.368Check in the Color Calibration ManagementConsole.Check in the Calibration sheet.(See "Checking the Color Calibration Status (Windows).") →P.861(See "Checking the Color Calibration Status (Mac OS X).") →P.897Specifying Execution GuideThe Execution Guide function displays a guide on the Control Panel, imagePROGRAF Status Monitor (Windows), im-agePROGRAF Printmonitor (Macintosh), RemoteUI, and/or the Color Calibration Management Console.If you enable this function, an Execution Guide is displayed in the following cases.• When a new Printhead has been installed• When a certain amount of printing has been executed after color calibration is executed• When the data of color calibration has been initializedTo enable the function, set Set Exec. Guide to On on the menu of the Control Panel.Color Calibration Using the Printer Sensor iPF6450User's GuideColor Management Color Calibration828
