Canon imagePROGRAF TM-305 Setup Manual

Also see for imagePROGRAF TM-200: Service guide Quick guide Online manual

Canon imagePROGRAF TM-305 Setup Manual Manual pdf 1 page image

1QT6-2699-V01 PRINTED IN XXXXXXXXXXXXXXXX © CANON INC. 2018QT62699V01It is recommended that you reserve space of the following dimensions to allow you to work around the printer.The images below show the space required to install each printer.Before Setting Up the PrinterRead this manual before attempting to operate the printer.Keep this manual for future reference.Set up the printer using the following procedure.• Windows is a trademark or registered trademark of MicrosoftCorporation in the U.S. and/or other countries.TM-305/TM-300Installation space (W x D x H)∙ When using SD-3266.5 x 67.0 x 53.6 inches (1689 x 1700 x 1360 mm)TM-205/TM-200Installation space (W x D x H)∙ When not using the stand54.5 x 53.5 x 29.1 inches (1382 x 1358 x 739 mm)∙ When using SD-2354.5 x 67.0 x 53.6 inches (1382 x 1700 x 1360 mm)Installation SpaceOverview of SetupImportant• The printer stand may not be included with your model.• The space required in front of the printer differs on how the basket supplied with the printer stand is used. This shows the installation space when used in theposition in the illustration.Important• Instructions in this Setup Guide show the TM-305 printer. Note that your printer may look different from these illustrations in some cases. However, the basicoperations are the same.If an error message appears during setup or other problemsoccur, refer to "Responding to Messages" on p.14.RMC (Regulatory Model Code): K10489RMC (Regulatory Model Code): K10490RMC (Regulatory Model Code): K10487RMC (Regulatory Model Code): K10488Setup GuideIntroductory InformationENGLISHIn order to ensure that this product is used safely, be sure to read the precautions.-> Quick Guide (separate manual)∙ Check this also after setup is complete.7.9 inches(200 mm)0.4 inches(10 mm)7.9 inches(200 mm)11.8 inches (300 mm)0.4 inches(10 mm)7.9 inches(200 mm)23.6 inches(600 mm) 23.6 inches(600 mm)23.6 inches(600 mm)(When not usingthe stand)(When using the stand) (When using the stand)7.9 inches(200 mm)11.8 inches (300 mm)* Assembling the Stand (P.3) * Refer to theseparate manualInstalling the Printer (P.3)Turning On the Printer (P.5)Installing the Ink Tanks (P.6)Installing the Print Head (P.7)Loading Paper (P.9)Printing From a Smartphone or Tablet (P.13)Storing Accessories (P.13)Loading Roll Paper After Setup (P.13)Displaying the Online Manual (P.14)∙ Performing Print Head Adjustment andSelecting the Connection Method (on p.11 to p.13)∙ Connecting to the Printer