Canon imagePRESS Server G200 Service Manual

Also see for imagePRESS Server G200: Configuration and setup

4. Select the drive letter for the USB flash drive, and click Next.5. When a message appears indicating that the USB flash drive is prepared, click Close to exit the Fiery USB Setup Tool.6. Remove the USB flash drive from the computer.IMPORTANT:Do not leave the prepared USB flash drive attached to the computer. If the drive is still attached when the computerstarts up or reboots, system corruption may result.7. Label the prepared USB flash drive with identifying information.For example, copy onto a label tag (1) the product name, and (2) the system software version number that you find printedon the System Software DVD label. The USB flash drive is now prepared and can be used to install system software.■ To install system software using a prepared USB flash drive1. Remove all USB devices that may be connected to the imagePRESS Server.2. If possible, print the Configuration pages (see “To print the Configuration pages” on page 46)The Configuration pages contain a list of any installed options and a record of the customer’s current Setup configuration3. If you are reinstalling the same version of system software, back up the current system configuration (see “Backing up thesystem configuration” on page 38) .4. Shut down the imagePRESS Server (see“Starting, shutting down, rebooting, and restarting the imagePRESS Server” onpage 7). Leave the imagePRESS Server power switch in the ON (|) position.5. Power off the printer using the main power switch.The imagePRESS Server will be automatically shut down.6. Move the imagePRESS Server power switch to the OFF (O) position.7. Disconnect all external cables from the imagePRESS Server, except the power cable and the printer interface cable.NOTE:Be sure to leave the power cable connected between the imagePRESS Server and the power outlet.8. Flip the service switches to boot mode (switch 1 set to ON; switch 2 set to OFF).NOTE:The LED display is mounted in upside-down orientation.1 234Service switches on the imagePRESS ServerNo. Item No. Item1 Service switches 3 Flip the service switches from normal (OFF) position...2 LED display 4 ...to service mode (ON) position.4. INSTALLING SYSTEM SOFTWARE44