Canon imagePRESS C8000VP Quick Manual

Also see for imagePRESS C10000VP: Practical guide

Canon imagePRESS C8000VP Quick Manual Manual pdf 37 page image

37Cleaning and Maintenance▀ Inspection of the BreakerThis machine has a breaker that detects excess current or leakage current. Make sure to test the breaker once a monthby following the procedure below.1 Turn OFF the main power.• Make sure that the main power is turned OFF, before inspectingthe breaker.2 Push the test button located on the rear of the machine.• Push the test button with the tip of a ball-point pen or a similarobject. Briefly push the test button.3 Confirm that the breaker dial is in the OFF (" " side)position.• If the breaker dial does not turn to the OFF position, repeat step2. If the breaker dial does not turn to the OFF position, despitecarrying out the above procedure two or three times, contactyour local authorized Canon dealer.4 Turn the breaker dial all the way down until it stops.